2022 NS0-592 Dumps PDF - NS0-592 Real Exam Questions Answers
Valid NS0-592 Test Answers & Network Appliance NS0-592 Exam PDF
Network Appliance NS0-592 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NetApp NS0-592 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Exam Name | Support Engineer ONTAP Specialist |
| Duration | 120 minutes |
| Exam Price | $150 USD |
| Number of Questions | 60 |
| Sample Questions | NetApp NS0-592 Sample Questions |
| Passing Score | 62% |
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Exam Code | NS0-592 NCSE ONTAP |
NEW QUESTION 34
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)
- A. The source and target volumes reside on different cluster nodes.
- B. The client should be using Windows 10 for ODX support.
- C. SMB 3.0 disabled on the CIFS SVM.
- D. Deduplication is not enabled on the destination volume.
Answer: C,D
NEW QUESTION 35
A customer called you after a failure in their Microsoft Hyper-V environment on the "SVM1" SVM. The customer wants to enable nondisruptive operations (NDO) to prevent future failures.
In this scenario, which two actions must be performed? (Choose two.)
- A. Verify that SMB2 is enabled.
- B. Verify that SMB3 is enabled.
- C. Verify that the continuously-available option is set on the CIFS share.
- D. Verify that the branchcache option is set on the CIFS share.
Answer: A,C
NEW QUESTION 36
Click the exhibit button.
You execute a few commands and many fail, as shown in the exhibit.
What could cause the error?
- A. The mgwd user space process on cluster1-02 failed.
- B. The aggregates were manually brought offline.
- C. The bcomd user space process on cluster1-02 failed.
- D. The cluster-02 node is down.
Answer: D
NEW QUESTION 37
Click the exhibit button.
Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)
- A. The DS2246 shelf is wrong; the shelf ID must be 11.
- B. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
- C. Disk shelves 10 and 20 are cabled incorrectly to each other.
- D. The FAS2554 system is cabled incorrectly to shelf ID 20.
Answer: C,D
NEW QUESTION 38
Your customer has initiated several volume move commands to redistribute the workload in their 8-node cluster. To verify that this process is not affecting their client access, they were monitoring the network switches that provide client access, but they do not see the network load of the volume move command.
In this scenario, what is the reason for the behavior?
- A. The volume move command uses the intercluster LIFs, not the data LIFs.
- B. The volume move command uses the cluster interconnect switches, not the client access switches.
- C. The volume move command uses copy offload protocol, so it does not show up when monitored.
- D. The volume move command uses the HA iWarp interconnect, not the client access switches.
Answer: C
NEW QUESTION 39
Click the exhibit button.
A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.
Referring to the output shown in the exhibit, which corrective step should be taken?
- A. Perform the volume reallocation.
- B. Add more spindles.
- C. Move some volumes off the affected aggregate.
- D. Throttle the client traffic.
Answer: D
NEW QUESTION 40
The root aggregate on your single-node ONTAP cluster failed. You have the configuration backups saved on your FTP server?
In this scenario, which two steps are part of the recovery procedure? (Choose two.)
- A. Create a new root aggregate and set its ha_policy option to cfo.
- B. Perform a Netboot using the configuration backup.
- C. Create a new aggregate and set its ha_policy option to sfo.
- D. Boot into maintenance mode.
Answer: A,D
NEW QUESTION 41
What is a major difference between NFSv3 and NFSv4.x?
- A. NFSv4.x requires an auxiliary protocol for mounting, and NFSv3 does not.
- B. NFSv4.x is stateful, and NFSv3 is stateless.
- C. NFSv4.x is stateless, and NFSv3 is stateful.
- D. NFSv4.x requires an auxiliary protocol for status monitoring, and NFSv3 does not.
Answer: B
NEW QUESTION 42
Click the exhibit button.
Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf.
Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.
"Both SAS connections from one controller go to the same shelf."
Referring to the exhibit, which statement is correct?
- A. A faulty cable is causing the problem.
- B. A faulty IOM is causing the problem.
- C. You are unable to obtain a "Cable Visualization" overview from Active IQ.
- D. You can correct this problem without downtime on the FAS system.
Answer: D
NEW QUESTION 43
Click the exhibit button.
A customer has the ns-switch shown in the exhibit.
Which two statements are true in this scenario? (Choose two.)
- A. User names not present in the local database are looked up in LDAP.
- B. Host names are always resolved using the configured DNS server.
- C. User mapping decisions are always based on the LDAP configuration.
- D. Groups can be looked up both in the local database and in LDAP.
Answer: B,D
NEW QUESTION 44
Click the exhibit button.
A customer has an FC SAN with brocade switches. Each server attached to the SAN gas four FC ports. The customer describes that one of their servers has only four paths to the LUNs configured on the cluster. There should be eight paths on all the other servers. The switch administrator has verified the zone configuration.
Referring to the exhibit, which two actions would you perform to troubleshoot the problem? (Choose two.)
- A. Review the igroup configuration on the cluster.
- B. Review the LIF configuration on the cluster.
- C. Review the driver version on the server.
- D. Review that the host side FC link ports are enabled.
Answer: B,C
NEW QUESTION 45
A customer reports that a LUN is offline because the volume is out of space even though the space-reserve parameter is configured to enabled on the LUN.
Which two statements are correct in this scenario? (Choose two.)
- A. The containing aggregate is thin-provisioned.
- B. The volume has snapshots.
- C. The fractional reserve is set to 0%.
- D. Deduplication is inflating the LUN when it is brought online.
Answer: A,B
NEW QUESTION 46
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?
- A. The cloned volume must be split from the source volume before the LAN can be used.
- B. The cloned LUN needs to be mapped to an initiator group.
- C. The cloned LUN must be renamed to a different name than the name of the source LUN.
- D. The cloned LUN must be brought online.
Answer: A
NEW QUESTION 47
Click the exhibit button.
A volume move operation has been initiated to move a volume named MirrScr from one aggregate to another.
The operation failed with the error that is shown in the exhibit.
In this scenario, which statement is correct?
- A. Cancel and restart the volume move operation.
- B. Manually trigger the cutover process in order to restart the job.
- C. The volume move cannot be completed at this time because of high use in this node.
- D. There are too many snapshots on the source volume.
Answer: B
NEW QUESTION 48
You configured iSCSI multipathing on a Windows host to a 2-node ONTAP cluster so that you can attach to some LUNs. You see that the host logging in to both iSCSI LIFs in the ONTAP cluster, and you notice that the igroup is correctly set. After you open Disk Management and rescan for disks, the NetApp LUNs do not show up.
In this scenario, what should be performed to enable the LUNs to be visible to the Windows host?
- A. Set up Selective LUN Mapping (SLM) and try scanning again.
- B. Configure the SVM for FCP and try scanning again.
- C. Set up LUN mapping and try scanning again.
- D. Configure the ONTAP nodes for HA and try scanning again.
Answer: A
NEW QUESTION 49
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)
- A. stats volume
- B. statit
- C. lun stats -vserver
- D. stats lun
Answer: B,C
NEW QUESTION 50
A customer has created an interface group (igroup) named a0a, a VLAN named a0a-2500, and a data LIF associated with the VLAN interface that has been assigned an IP of 10.254.10.100. The customer is able to ping 10.254.10.100 from a Windows client without any issues, but data traffic is not working.
In this scenario, what is the solution to the problem?
- A. Disable flow control on the a0a interface.
- B. Correct the MTU mismatch between the broadcast domain configuration and the upstream network switches.
- C. Allow data traffic by using LIF firewall policies.
- D. Configure an appropriate service policy for the data LIF.
Answer: C
NEW QUESTION 51
Your customer added a new DS2246 shelf to an existing stack on their FAS8060A system. The customer then noticed that the new shelf's disks appear with the shelf serial number instead of the shelf ID in the sysconfig -r command output.
What is the reason for this problem?
- A. There is failed IOM module in the new shelf.
- B. The SAS is cabled incorrectly.
- C. The ACP is cabled incorrectly.
- D. The new shelf has the same ID as another shelf.
Answer: B
NEW QUESTION 52
A reboot was performed by a watchdog reset on the node.
In this scenario, which statement is true?
- A. The service processor no longer responds.
- B. In case of an L2 watchdog event, determine whether a core was dumped.
- C. The wafl_check command should be executed.
- D. In case of an L1 watchdog event, determine whether a panic message was recorded.
Answer: A
NEW QUESTION 53
......
NS0-592 Exam Dumps - PDF Questions and Testing Engine: https://www.passleadervce.com/Network-Appliance-NCSE/reliable-NS0-592-exam-learning-guide.html