Best Cisco 300-410 Exam Practice Material Updated on Mar 24, 2024
New 300-410 Actual Exam Dumps, Cisco Practice Test
Cisco 300-410 (Implementing Cisco Enterprise Advanced Routing and Services) Certification Exam is a professional-level certification exam that validates the skills and knowledge of network engineers and administrators in implementing advanced routing and services for enterprise networks. 300-410 exam covers a wide range of topics related to routing protocols such as OSPFv2, OSPFv3, EIGRP, BGP, and PBR, as well as services including VPN, QoS, security, and automation. The Cisco 300-410 exam is one of the six concentration exams that can be taken to earn the CCNP Enterprise certification.
NEW QUESTION # 16
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION # 17
Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.
Answer:
Explanation:
NEW QUESTION # 18
Which transport layer protocol is used to form LDP sessions?
- A. SCTP
- B. UDP
- C. RDP
- D. TCP
Answer: D
NEW QUESTION # 19
Refer the exhibit.
Which action resolves intermittent connectivity observed with the SNMP trap packets?
- A. Decrease the committed burst Size of the mgmt class map
- B. Increase the CIR of the mgmt class map
- C. Add one new entry in the ACL 120 to permit the UDP port 161
- D. Add a new class map to match TCP traffic
Answer: C
NEW QUESTION # 20
Refer to the exhibit.
Refer to the exhibit. An engineer configured two ASBRs, 10.4.17.6 and 10.4.15.5, in an OSPF network to redistribute identical routes from BGR However, only prefixes from 10.4.17.6 are installed into the routing table on R1. Which action must the engineer take to achieve load sharing for the BGP-originated prefixes?
- A. The ASBRs are advertising the redistributed prefixes with the iBGP metric and must be modified to Type 1 on ASBR 10.4.17.6.
- B. The ASBRs are advertising the redistributed prefixes as Type 1 and must be modified to Type 2
- C. The ASBRs are advertising the redistributed prefixes with a different admin distance and must be changed to 110 on ASBR 10.4.15.5.
- D. The admin distance of the prefixes must be adjusted to 20 on ASBR 10.4.15.5 to advertise prefixes to R1 identically from both ASBRs.
Answer: B
NEW QUESTION # 21
Which label operations are performed by a label edge router?
- A. PUSH and POP
- B. SWAP and PUSH
- C. SWAP and POP
- D. PUSH and PHP
Answer: A
Explanation:
Explanation
A label edge router (LER, also known as that operates at the edge of an MPLS network and acts as the entry and exit points for the network. LERs push an MPLS label onto an incoming packet and pop it off an outgoing packet.
NEW QUESTION # 22
Refer to the exhibit.
Troubleshoot and ensure that branch B only ever uses the MPLS B network to reach HQ. Which action achieves this requirement?
- A. Modify the weight of all HQ prefixes received at branch B from the MPLS B network to be higher than the weights used on the MPLS A network
- B. Introduce AS path prepending on the branch A MPLS B network connection so that any HQ advertisements from branch A toward the MPLS B network are prepended three times
- C. Introduce an AS path filter on branch A routers so that only local prefixes are advertised into BGP
- D. increase the local preference for all HQ prefixes received at branch B from the MPLS B network to be higher than the local preferences used on the MPLS A network
Answer: C
NEW QUESTION # 23
Refer to the exhibit.
A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands Which action resolves the issue?
- A. Configure full access for the username from TACACS+ server
- B. Configure the username from a local database
- C. Configure TACACS+ synchronization with the Active Directory admin group
- D. Configure an authorized IP address for this user to access this router
Answer: A
NEW QUESTION # 24
Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 25
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
- A. Router(config-if)#ospfv3 1 ipv4 area 0
- B. router ospfv3 1
address-family ipv4 - C. Router(config-router)#ospfv3 1 ipv4 area 0
- D. router ospfv3 1
address-family ipv4 unicast
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-xe-3s-book/ip6-route-ospfv3-add-fam-xe.html
NEW QUESTION # 26
Refer to the exhibit.
AAA server 10.1.1.1 is configured with the default authentication and accounting settings, but the switch cannot communicate with the server Which action resolves this issue?
- A. Match the authentication port
- B. Correct the shared secret.
- C. Match the accounting port
- D. Correct the timeout value.
Answer: A
Explanation:
Explanation
Command Default
Accounting port: 1813
Authentication port: 1812
Accounting: enabled
Authentication: enabled
Retransmission count: 1
Idle-time: 0
Server monitoring: disabled
Timeout: 5 seconds
Test username: test
Test password: test
NEW QUESTION # 27
Refer to the exhibit.
Refer to the exhibit. An engineer configured SNMP traps to record spoofed packets drop of more than 48000 a minute on the ethernet0/0 interlace. During an IP spoofing attack, the engineer noticed that no notifications have been received by the SNMP server. Which configuration resolves the issue on R1?
- A. ip verify unicast notification threshold 8000
- B. ip verify unicast notification threshold 800
- C. ip verity unicast notification threshold 48000
- D. ip verify unicast notification threshold 80
Answer: B
NEW QUESTION # 28
Drag and drop the MPLS terms from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 29
In which two ways does the IPv6 First-Hop Security Binding Table operate? (Choose two.)
- A. by IPv6 HSRP to make sure neighbors are authenticated before being used as gateways
- B. by various IPv6 guard features to validate the data link layer address
- C. by IPv6 routing protocols to securely build neighborships without the need of authentication
- D. by storing hashed keys for IPsec tunnels for the built-in IPsec features
- E. by the recovery mechanism to recover the binding table in the event of a device reboot
Answer: B,E
Explanation:
Explanation
Overview of the IPv6 First-Hop Security Binding Table
A database table of IPv6 neighbors connected to the device is created from information sources such as NDP snooping. This database, or binding table, is used by variousIPv6 guard features to validate the link-layer address (LLA), the IPv4 or IPv6 address, and the prefix binding of the neighbors to prevent spoofing and redirect attacks.
IPv6 First-Hop Security Binding Table Recovery MechanismThe IPv6 first-hop security binding table recovery mechanism enables the binding table to recover in the event of a device reboot.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6_fhsec/configuration/15-s/ip6-fhs-bind-table.html
NEW QUESTION # 30
Refer to the exhibit.
Refer to the exhibit. Which action limits the access to R2 from 192.168.12.1?
- A. Swap sequence 10 with sequence 20 in access-list 100.
- B. Modify sequence 20 to permit tcp host 192.168.12.1 eq 22 any to access-list 100
- C. Swap sequence 20 with sequence 10 in access-list 100
- D. Modify sequence 10 to deny tcp any eq 22 any to access-list 100.
Answer: C
NEW QUESTION # 31
Refer to the exhibit.
The network administrator configured VRF lite for customer A.
The technician at the remote site misconfigured VRF on the router.
Which configuration will resolve connectivity for both sites of customer_a?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
Explanation:
From the exhibit, we learned:
+ VRF customer_a was exported with Route target (RT) of 1:1 so at the remote site it must be imported with the same RT 1:1.
+ VRF customer_a was imported with Route target (RT) of 1:1 so at the remote site it must be exported with the same RT 1:1.
Therefore at the remote site we must configure the command "route-target both 1:1" (which is equivalent to two commands "route-target import 1:1" & "route-target export 1:1".
NEW QUESTION # 32
What are two MPLS label characteristics? (Choose two.)
- A. Labels are imposed in packets after the Layer 3 header.
- B. LDP uses TCP for reliable delivery of information.
- C. The label edge router swaps labels on the received packets.
- D. An MPLS label is a short identifier that identifies a forwarding equivalence class.
- E. A maximum of two labels can be imposed on an MPLS packet.
Answer: A,D
NEW QUESTION # 33
Refer to the exhibit.
An engineer is trying to block the route to 192.168.2.2 from the routing table by using the configuration that is shown. The route is still present in the routing table as an OSPF route. Which action blocks the route?
- A. Add this statement to the route map: route-map RM-OSPF-DL deny 20.
- B. Change sequence 10 in the route-map command from permit to deny.
- C. Use an extended access list instead of a standard access list.
- D. Use a prefix list instead of an access list in the route map.
Answer: B
NEW QUESTION # 34
Drag and drop the MPLS VPN device types from me left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 35
Refer to the exhibit.
A client is concerned that passwords are visible when running this show archive log config all.
Which router configuration is needed to resolve this issue?
- A. MASS-RTR(config)#service password-encryption
- B. MASS-RTR(config)#aaa authentication arap
- C. MASS-RTR(config-archive-log-cfg)#hidekeys
- D. MASS-RTR(config-archive-log-cfg)#password encryption aes
Answer: C
Explanation:
Explanation
NEW QUESTION # 36 
Refer to the exhibit. After reloading the router an administrator discovered that the interface utilization graphs displayed inconsistencies with their previous history in the NMS. Which action prevents this issue from occurring after another router reload in the future?
- A. Save the router configuration to startup-config before reloading the router
- B. Configure SNMP to use static OlDs referring to individual router interfaces
- C. Rediscover all the router interfaces through SNMP after the router is reloaded
- D. Configure SNMP interface index persistence on the router
Answer: D
NEW QUESTION # 37
Which SNMP verification command shows the encryption and authentication protocols that are used in SNMPV3?
- A. show snmp user
- B. show snmp group
- C. show snmp
- D. show snmp view
Answer: A
NEW QUESTION # 38
What are two characteristics of VRF instance? (Choose two.)
- A. It is defined by the VPN membership of a customer site attached to a P device.
- B. All VRFs share customers routing and CEF tables .
- C. Each VRF has a different set of routing and CEF tables
- D. A customer site can be associated to different VRFs
- E. An interface must be associated to one VRF.
Answer: C,E
NEW QUESTION # 39
Which statement about MPLS LDP router ID is true?
- A. The force keyword changes the router ID to the specific address causing any impact.
- B. The loopback with the highest IP address is selected as the router ID.
- C. If not configured, the operational physical interface is chosen as the router ID even if a loopback is configured.
- D. If MPLS LDP router ID must match the IGP router ID.
Answer: B
NEW QUESTION # 40
......
To succeed in the Cisco 300-410 exam, candidates should have a strong foundation in networking concepts and protocols. They should also have experience with implementing and troubleshooting enterprise-level networks. 300-410 exam consists of multiple-choice questions and simulation-based scenarios that test candidates' abilities to solve complex problems and make strategic decisions. Upon passing the exam, candidates will earn the CCNP Enterprise certification, which is recognized globally as a symbol of expertise in enterprise networking. Implementing Cisco Enterprise Advanced Routing and Services certification is highly respected by employers and can lead to career advancement opportunities and higher salaries.
What Can You Benefit from Cisco 300-410 Exam
When you get a Cisco Certified Entry Network Technician (CCENT) you can make a difference in the world by helping to protect the environment and improve people's lives. Search for the opportunities to put your knowledge to work by placing Cisco 300-410 exam certification. Worth to get Cisco 300-410 certification to make a difference in the world. Certified professionals get better salary offers, more interesting jobs are available for them, and are able to move into other fields. Cover the Cisco 300-410 exam or get ready for the exam by using Cisco 300-410 exam dumps. Get ready to pass the 300-410 exam. Moment of success is now. Files are available for download. Understand the topics to pass the 300-410 exam.
Study HIGH Quality 300-410 Free Study Guides and Exams Tutorials: https://www.passleadervce.com/CCNP-Enterprise/reliable-300-410-exam-learning-guide.html
Download Cisco 300-410 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1qsNeo0q6ThY-i9LY_9gxJb0npudaHXA8