Dumps Moneyack Guarantee - 350-501 Dumps UpTo 50% Off
Updated Mar-2022 Pass 350-501 Exam - Real Practice Test Questions
Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam Certification Path
Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam is affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. This is the official prerequisite for this exam. However, the course, Integrating VPN Services from Cisco Service Provider, allows applicants to prepare for this exam and is highly recommended.
Introduction to Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
This exam is for a networking career through how networks operate. This exam introduces architectures, models, protocols, and networking elements - functions needed to support the operations and priorities of mid-sized to large companies and small innovative retailers. You will get the chance to build simple local area networks (LANs) yourself. You will also get a working knowledge of IP addressing schemes, foundational network security, and be able to perform basic configurations for routers and switches.
The primary responsibility of the Associate Network Engineer is to update the technical standards and strategic technical roadmaps. The professionals must take care of the network engineering policies, and operations that include network programmability. The Network Engineer has to act as a backup for the LAN/WAN and Firewall teams whenever required. They must install, monitor, and maintain the LAN infrastructure. The professional should make sure smooth and proper functioning of the network system.
The Troubleshooting and Managing Cisco IP Networks Cisco Training on Demand is an all-inclusive training solution intended to show you how to plan and maintain on a routine basis complex business networks routed and switched. You will first understand how to use technology-based methods and a comprehensive approach to network troubleshooting. You can learn to use both common Cisco IOS troubleshooting tools and more advanced tools such as Syslog, NetFlow, and Cisco IOS Embedded Event Manager (EEM) to help with troubleshooting efforts. In the hands-on workshops, you discover the methods and methods used by network engineers for troubleshooting and managing complex network routed and switching networks. You can also learn how to troubleshoot network connectivity issues, IPv6 connectivity and assignment issues, routing loop issues, Improved Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF) Protocol, and Boundary Gateway Protocol (BGP) routing problems. Besides, you are operating via the Dynamic Host Configuration Protocol (DHCP) to resolve problems, network security, and VLAN configuration issues, as well as many other general network issues. A crucial requirement of this course is the opportunity to learn new ideas and deepen comprehension across a wide variety of integrated lab scenarios. You have troubleshooting possibilities through 350-501 practice exam dumps and several lab environments across a variety of case studies.
Topics of Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
These core topics listed below are general recommendations for the material that is likely to be used for the 350-501 exam test. However, on any delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the exam and for clarity purposes. It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. Following topics can also be found in the 350-501 exam dumps:
- Describing Cisco IOS Software Architectures
- Implementing BGP
- Configuring L3VPN Services
- Implementing QoS
- Implementing Cisco MPLS Traffic Engineering
- Implement Integrated IS-IS Routing
- Implementing OSPF
- Deploy Cisco IOS XR and IOS XE Basic Device Configuration
- Implementing High Availability in Networking
- Implement BGP Security
- Implementing IS-IS
- Implement Ethernet over MPLS (EoMPLS)
- Implementing Control Plane Security
- Implementing Virtualization in Service Provider Environments
- Introducing Cisco NSO
- Transitioning to IPv6
- Implementing Automation and Assurance
- Implement OSPF Routing
- Describing QoS Architecture
- Implementing Route Maps and Routing Protocol for LLN )Low-Power and Lossy Networks), RPL
- Filter BGP Prefixes Using RPL
- Implement MPLS in the Service Provider Core
- Describing VPN Services
- Implement Segment Routing
- Introducing Network Programmability
- Implementing Data Plane Security
- Implement Remotely Triggered Black Hole (RTBH) Filtering
- Configuring L2VPN Services
- Describing Segment Routing
- Implement MPLS L3VPN
NEW QUESTION 114
Refer to the exhibit.
A network operator working for a telecommunication company with an employee 3994:37:650 is implementing a cisco Unified MPLS solution. What is the effect of this implementation?
- A. IS-IS is deployed between the PEs and ABRs with RFC 3107.
- B. BGP is deployed between the PEs and ABRs with RFC 3107.
- C. OSPF is deployed between the PEs and ABRs with RFC 3107.
- D. EIGRP is deployed between the PEs and ABRs with RFC 3107.
Answer: B
Explanation:
NEW QUESTION 115 
Refer to the exhibit. Which effect of this configuration is true?
- A. It enables tagging for VLAN 12 on the interface.
- B. It enables AToM on interface gigabitethernet1/0.
- C. It enables MPLS on the interface.
- D. It creates a pseudowire class named cisco.
Answer: B
Explanation:
Section: Architecture
Explanation/Reference: https://community.cisco.com/t5/service-providers-documents/configuration-example-atom-any- transport-over-mpls-for-like-to/ta-p/3144810
NEW QUESTION 116
Drag and drop the methods of Cisco MPLS TE tunnel traffic assignment from the left onto their characteristics on the right.
Answer:
Explanation:
NEW QUESTION 117 
Refer to the exhibit. This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows NETCONF uses remote procedure calls.
- B. It shows the hostname of the device as rpc-reply.
- C. It shows that the running configuration is blank.
- D. It shows that the full configuration is being modeled by YANG.
Answer: A
Explanation:
Section: Automation and Assurance
NEW QUESTION 118
Refer to the exhibit. The USER mat is connecting an application on an Internet connection in AS 100 is facing these issues:
The USER lost the connection to the application during a failure Between IG and R2.
Router R2 configuration a lost due to a power outage.
The application the USER is connecting to a hosted behind CE2.
What action resolves the issues on R3 and R4 routers?
- A. Apply high Local Preference on R3 toward R1
- B. Apply low Local Preference on R4 toward R2.
- C. Set R3 as a route reflector for R4 and CE1
- D. Set R4 as a route reflector for R3 and CE2
Answer: B
NEW QUESTION 119
Which BGP attribute is used first when determining the best path?
- A. AS path
- B. weight
- C. origin
- D. local preference
Answer: B
Explanation:
Section: Networking
NEW QUESTION 120
After analyzing the network environment, an engineer decides to implement a full separation model for internet access and MPLS L3VPN services. What is the reason for this decision?
- A. It requires only one edge router
- B. It enables you to choose whether to separate or centralize each individual service.
- C. It is easier to manage a system in which services are mixed
- D. It enables EGP and IGP to operate independently
Answer: D
NEW QUESTION 121
A network engineer must enable the helper router to terminate the OSPF graceful restart process.
If it detects any changes in the LSA. Which command enables this feature?
- A. nsf ietf helper disable
- B. nsf Cisco helper disable
- C. nsf cisco enforce global
- D. nsf ietf helper strict-lsa-checking
Answer: D
NEW QUESTION 122
You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two.)
- A. A zero bandwidth tunnel is not a valid option.
- B. The dynamic path option is supported only with IS-IS.
- C. Tunnels can be configured with dynamic path or explicitly defined path.
- D. Tunnel links inherit IGP metrics by default unless overridden.
- E. The bandwidth statement creates a "hard" reservation on the link.
Answer: C,D
Explanation:
Section: Architecture
NEW QUESTION 123
A network engineer is implementing BFD configuration changes on a customer's equipment. How is the bfd interval configuration on the interface disconnected?
- A. It is automatically disconnected when the BFD-configured subinterface is removed.
- B. It is automatically disconnected when the BFD main interface is removed.
- C. The IPv4 or IPv6 address configuration on the interface changes.
- D. The status of the interface changes.
Answer: B
NEW QUESTION 124
What does DWDM use to combine multiple optical signals?
- A. IP protocols
- B. wavelength
- C. time slots
- D. frequency
Answer: B
NEW QUESTION 125
While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.
After you issue this command, which BGP packets does the PE accept?
- A. from 2.2.2.2, with a TTL of 253 or more
- B. to 2.2.2.2, with a TTL of 2 or more
- C. to 2.2.2.2, with a TTL of less than 253
- D. from 2.2.2.2, with a TTL of less than 2
Answer: A
NEW QUESTION 126 
Refer to the exhibit. A network engineer is configuring MPLS LDP synchronization on router R1. Which additional configuration must an engineer apply to R1 so that it will synchronize to OSPF process 1?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Section: MPLS and Segment Routing
NEW QUESTION 127
Refer to the exhibit:
Which statement about this configuration is true"?
- A. It requires an explicit Cisco MPLS TE path to be configured for the tunnel to run
- B. It is the configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing
- C. It requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run
- D. It requires OSPF to also be running to have optimized Cisco MPLS TE tunnels
Answer: B
NEW QUESTION 128
N NO: 69
Which service is a VNF role?
- A. Firewall
- B. Compute
- C. Storage
- D. Network
Answer: A
NEW QUESTION 129
Which statement about the Cisco MPLS TE forwarding adjacency feature is true?
- A. It enables the MPLS core to use EIGRP as the routing protocol
- B. It enables the headend and tailend routers to establish a bidirectional tunnel
- C. It enables the tailend router to advertise routes to the headend router over the tunnel
- D. It enables the Cisco MPLS TE tunnel to be advertised into the running IGP.
Answer: D
NEW QUESTION 130
Refer to the exhibit:
An engineer is preparing to implement link aggregation configuration.
Which statement al about this configuration is true?
- A. The switch port accepts LACP and PAgP packets from a connected peer and negotiate an EtherChannel using the common EtherChannel mode.
- B. The switch port actively sends packets to negotiate an EtherChannel using PAgP
- C. The switch port passively negotiates an EtherChannel if it receives PAgP packets from a connected peer
- D. The switch port negotiates an EtherChannel if it receives LACP packets from a connected peer
Answer: B
NEW QUESTION 131
......
Download Free Cisco 350-501 Real Exam Questions: https://www.passleadervce.com/CCNP-Service-Provider/reliable-350-501-exam-learning-guide.html
Pass Your Exam With 100% Verified 350-501 Exam Questions: https://drive.google.com/open?id=1Whxol3_lHs-GWi84GrPHwDPSbJprPOGl