Get Instant Access of 100% Real EMC D-XTR-DS-A-24 Exam Questions with Verified Answers
Exam Dumps for the Preparation of Latest D-XTR-DS-A-24 Exam Questions
NEW QUESTION # 10
XtremlO encrypts data that is stored on which drive?
- A. Storage Controller and DAE
- B. Storage Controller only
- C. DAE only
- D. Physical XMS, Storage Controller, and DAE
Answer: C
Explanation:
The Dell EMC XtremIO X2 Storage Array uses Data at Rest Encryption (D@RE) to encrypt data. This encryption occurs on the Self Encrypting Drives (SEDs) within the Data Availability Enclosures (DAE).The DAEs house the physical drives where the actual data is stored and encrypted1.
References:
* Introduction to Dell EMC XtremIO X2 Storage Array document2.
* Dell EMC XtremIO v6.3 document1.
NEW QUESTION # 11
Which host OS supports both 512 bytes and 4 KB XtremIO logical block (LB) volumes?
- A. VMware
- B. HP-UX
- C. Linux
- D. IBM AIX
Answer: A
Explanation:
The Dell EMC XtremIO X2 storage array offers flexible scaling options with building blocks called X-Bricks1.The system can start with a single X-Brick and scale up to 72 SSDs for a single X-Brick1.When additional performance and capacity are required, the system can be expanded by adding additional X-Bricks1.
Among the options provided,VMwareis the host OS that supports both 512 bytes and 4 KB XtremIO logical block (LB) volumes23.VMware vSphere 6.7 and later versions support both 512-byte and 4K logical block sizes23.This is because VMware ESXi detects and registers the 4Kn devices and automatically emulates them as 512e3.
The other options, while they may be part of the overall process, are not specifically known to support both
512 bytes and 4 KB XtremIO logical block (LB) volumes:
* Linuxtypically supports multiple file system block sizes of 512, 1024, 2048, and 40964.However, it's not specifically mentioned that it supports both 512 bytes and 4 KB XtremIO logical block volumes5.
* IBM AIXalso supports multiple file system block sizes of 512, 1024, 2048, and 40966.But again, it's not specifically mentioned that it supports both 512 bytes and 4 KB XtremIO logical block volumes7.
* HP-UXdoes not specifically mention support for both 512 bytes and 4 KB XtremIO logical block volumes89.
Therefore, the verified answer isA.VMware, as it is the host OS that supports both 512 bytes and 4 KB XtremIO logical block (LB) volumes23.
NEW QUESTION # 12
Which document should an administrator consult to obtain recent changes, features, and limits for XtremIO?
- A. XtremIO Release Notes
- B. XtremlO Site Preparation Guide
- C. XtremIO Simple Support Matrix
- D. XtremIO Storage Array User Guide
Answer: A
Explanation:
To stay updated with the most recent changes, features, and limits for XtremIO, an administrator should consult theXtremIO Release Notes. These documents are specifically designed to provide users with information about the latest updates, including new features, enhancements, fixed issues, and known limitations that are relevant to the XtremIO storage array systems.
References:
* The Release Notes are typically the go-to resource for any updates and changes in the product.They are part of the standard documentation provided by Dell for their products1.
* For detailed information on the features and design of XtremIO, the "Dell XtremIO Design Achievement" document provides insights into the product features, functionality, use cases, and configurations2.
NEW QUESTION # 13
A customer has a workload with the following attributes:
. Generates 500,000 IOPs
. Maximum bandwidth of 14 GB/s
Which XtremlO X2 solution should be recommended to the customer?
- A. 1 X-Brick
- B. 2 X-Bricks
- C. 3 X-Bricks
- D. 4 X-Bricks
Answer: D
Explanation:
To accommodate a workload that generates 500,000 IOPS with a maximum bandwidth of 14 GB/s, the recommended XtremIO X2 solution would be 4 X-Bricks.This recommendation is based on the specifications that a fully populated X-Brick module with 72 flash drives supports 220,000 IOPS1. Therefore, to support
500,000 IOPS, more than two X-Bricks are required. Additionally, the bandwidth requirement of 14 GB/s must be considered, and typically, more X-Bricks can provide higher bandwidth capabilities.
References:
* Dell EMC Ready Solutions for Oracle with XtremIO X2 document2.
* Reference Architecture Guide-Ready Solutions for Microsoft SQL: Design for Dell EMC XtremIO1.
NEW QUESTION # 14
What can be demonstrated with the XMS Simulator?
- A. Configuring connectemc
- B. Initializing cluster
- C. Creating volumes
- D. Deploying XMS
Answer: C
Explanation:
The XtremIO XMS Simulator can be used for various purposes, including demos, product training, comparing XMS/XtremIO version release functionality, testing scripts against XtremIO's RESTful API, and XtremIO development, testing, and simulation1. Among the options provided, creating volumes is a task that can be demonstrated with the XMS Simulator.This is because the simulator allows users to interact with a simulated XtremIO environment, which includes managing and operating volumes as part of the overall management simulation1.
NEW QUESTION # 15
A storage administrator is configuring SAN switches and zoning to connect a four X-Brick XtremlO array. A VMware ESXi server is hosted on a blade chassis with 16 HBA ports.
In addition, the SAN consists of two separate SAN switches.
What is the recommended XtremlO best practice for zoning?
- A. Single Storage Controller HBA port to the first switch
Single Storage Controller HBA port to the second switch
Single initiator/multiple targets per zone
Maximum of 4 paths for each LUN per zone - B. Two HBA connections per host
Single initiator/multiple targets per zone
Maximum of 16 paths for each device
Host connected to each SAN switch - C. First Storage Controllers' HBA ports to the first switch
Second Storage Controllers' HBA ports to the second switch
Multipath all host ports to single LUNs per zone - D. Two HBA connections per host connected to a single switch
Multiple initiators/multiple targets per zone
Maximum of 4 paths for each LUN per zone
Answer: B
Explanation:
For a four X-Brick XtremIO array, the recommended best practice for zoning in a SAN environment with VMware ESXi servers is to have two HBA connections per host, with each host connected to both SAN switches. This configuration allows for redundancy and high availability. The zoning should be set up with a single initiator (the HBA on the host) to multiple targets (the storage controllers' HBA ports) per zone. This ensures that each host has multiple paths to the storage, allowing for failover and load balancing.The maximum number of paths for each device should be 16 to prevent exceeding the path limits and to maintain optimal performance1.
References:
* Dell Technologies community discussions on XtremIO Zoning Best Practices provide insights into the recommended zoning configurations for different XtremIO setups1.
* The Host Configuration Guide for XtremIO, which can be found on the Dell EMC support site, offers detailed instructions on zoning best practices for XtremIO storage arrays2.
NEW QUESTION # 16
Which host operating systems does the Live Optics Collector run on?
- A. Windows, Linux, Solaris, and HPUX
- B. Windows and Linux
- C. Windows, Linux, and Solaris
- D. Windows, Linux, and KVM
Answer: B
Explanation:
The Live Optics Collector, which is used for profiling several hardware storage arrays including the Dell XtremIO family of all-flash arrays, can run on any host with IP connectivity to the storage array being profiled. The supported operating systems for the Live Optics Collector areWindows and Linux.This is based on the information provided by the Live Optics support documentation, which outlines the process to produce an XtremIO array storage profile1.
References:
* The Live Optics support documentation provides detailed instructions on how to launch and run the Live Optics Collector, which includes the supported operating systems1.
NEW QUESTION # 17
You are connecting a Linux host to an XtremlO array. The host will be connected to the array using the QLogic HBA's. Based on the recommended best practice, what is the value for the queue depth?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
When connecting a Linux host to an XtremIO array using QLogic HBAs, the recommended best practice for the queue depth value is 256.This setting ensures that the XtremIO X2 storage arrays handle an optimal number of SCSI commands, including I/O requests, which is crucial for maintaining high performance and efficient data processing1.
References:
* The Dell EMC Ready Solutions for Oracle with XtremIO X2 document specifies the LUN queue depth to the recommended value of 256 for the QLogic HBAs used in their virtualized databases server1.
* Additional discussions on HBA Queue Depth and host settings for environments utilizing XtremIO can be found in the Dell Community forums2.
NEW QUESTION # 18
What is an accurate statement about XtremIO XVC refresh operations?
- A. Only snapshot-to-production refresh is supported
- B. Unmount of a production volume is not required
- C. O/S side device scan is not required
- D. Refreshed volume cannot be resized
Answer: B
Explanation:
XtremIO XVC (XtremIO Virtual Copies) allows for efficient snapshot management and operations, including the refresh of volumes. One of the key features of XVC is that it enables the refresh of a production volume from a snapshot without requiring the volume to be unmounted from the host. This capability is designed to minimize disruption and maintain continuous availability of data to applications during refresh operations.The refresh operation is handled within the XtremIO storage array, and the production volume remains accessible to the host during this process1.
References:
* The Dell XtremIO Design Achievement document provides information on the capabilities and features of XtremIO X2 systems, including XVC operations1.
* Additional details on XVC refresh operations can be found in the support documentation for the XtremIO Family on Dell's official website2.
NEW QUESTION # 19
A customer has a complex virtualized environment and wants to see a topology view from virtual or physical hosts down to the storage array volumes to identify application to storage dependencies.
Which Dell EMC product provides this solution?
- A. XtremIO VAAI plug in
- B. Technician Advisor
- C. ViPR SRM
- D. AppSync
Answer: C
Explanation:
ViPR SRM (Storage Resource Management) is the Dell EMC product that provides a comprehensive topology view from virtual or physical hosts down to the storage array volumes. This tool is designed to help customers manage complex virtualized environments by offering insights into application-to-storage dependencies.ViPR SRM delivers detailed reporting and analytics, which can be used to optimize storage performance and capacity planning1.
References:
* The Introduction to XtremIO X2 Storage Array document provides information on the system features and management tools available for XtremIO arrays, which includes details on how ViPR SRM can be used to visualize and manage the storage infrastructure1.
* Additional resources on the Dell EMC support site offer documentation and guides on how to effectively use ViPR SRM for storage resource management2.
NEW QUESTION # 20
Which software package is required for Fast I/O Failure for the AIX operating system?
- A. PowerPath
- B. MPIO
- C. ODM
- D. LVM
Answer: B
Explanation:
MPIO (MultiPath I/O) is required for Fast I/O Failure for the AIX operating system as it helps in managing multiple paths for redundancy and failover.
NEW QUESTION # 21
A user attempts to create a quorum disk for a host cluster. Volume parameters are:
Size = 1000 Kb
. Name 1 MB_Vol
However, the volume creation fails. What caused the process to fail?
- A. XtremlO volumes cannot be quorum disks
- B. Quorum disks cannot have an 8 kB block size
- C. Volume size is too small
- D. Volume name is invalid
Answer: C
Explanation:
The process to create a quorum disk for a host cluster failed because the volume size is too small12.
In a storage environment, the size of the volume plays a crucial role.If the volume size is too small, it may not be able to accommodate the data required for the quorum disk, leading to a failure in the creation process12.
In this case, the volume size is specified as 1000 Kb, which is likely insufficient for a quorum disk in a host cluster environment12.Therefore, increasing the volume size could potentially resolve this issue12.
NEW QUESTION # 22
What is true about the Solaris specific configuration settings?
- A. Enable flow control
- B. Disable flow control
- C. Increase the Maximum I/O Size parameter
- D. Decrease the Maximum I/O Size parameter
Answer: A
Explanation:
In the context of Dell XtremIO storage arrays and their interaction with host systems such as Solaris, flow control is a network feature that manages data transmission and helps prevent packet loss when network congestion occurs. Enabling flow control on Solaris when it's connected to XtremIO arrays can be crucial for maintaining data integrity and ensuring smooth communication between the host and the storage system.
The Dell EMC Host Connectivity Guide for Oracle Solaris provides detailed instructions and best practices for configuring Solaris systems that are connected to Dell EMC storage arrays, including XtremIO1. While the document does not explicitly mention the setting to "enable flow control," it is generally recommended to enable flow control in enterprise environments to manage data flow effectively and to prevent data loss or corruption during peak loads or network issues.
Enabling flow control can help in managing the pace at which data packets are sent, allowing the receiving device to handle the incoming data without being overwhelmed. This is particularly important in high-performance environments where XtremIO arrays are used, as they often handle large volumes of data transfers.
In summary, enabling flow control is a recommended practice for Solaris specific configurations when interfacing with Dell XtremIO storage arrays to ensure data transfer reliability and system stability.
NEW QUESTION # 23
When using the XtremIO PoC Toolkit, what is the purpose of the Age phase?
- A. Overwrite each LUN multiple times to ensure they contain all unique data
- B. Scatter writes across the entire array to simulate ordinary use of the system
- C. Continuously write to a specific range of logical block addresses to test Flash durability
- D. Test the performance of the All-Flash array with non-production static data
Answer: A
Explanation:
The purpose of the Age phase in the XtremIO PoC (Proof of Concept) Toolkit is to overwrite each LUN (Logical Unit Number) multiple times to ensure that they contain all unique data.This process is crucial for simulating a real-world scenario where the storage array has been in use for some time, which allows for the evaluation of the performance and behavior of the All-Flash array under more typical conditions1.
References:
* The XtremIO PoC Toolkit documentation, which outlines the procedures and phases used during a proof of concept to evaluate the performance and capabilities of the XtremIO storage system1.
* Discussions and resources available on professional forums and communities that share insights into the use and stages of the XtremIO PoC Toolkit2.
NEW QUESTION # 24
A customer wants to consolidate management of their XtremlO environment to as few XMS machines as possible. The customer's XtremlO environment consists of the following:
. Two XtremIO clusters running XIOS 4.0.2-80
. Two XtremlO clusters running XIOS 4.0.4-41
. Two XtremIO clusters running XIOS 4.0.25-27
. Two XtremIO X2 clusters running XIOS 6.0.1-27_X2
What is the minimum number of XMS machines required to complete the consolidation effort?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
To consolidate the management of an XtremIO environment, the minimum number of XtremIO Management Server (XMS) machines required depends on the compatibility of the XMS with the various XtremIO Operating System (XIOS) versions present in the environment. A single XMS can manage multiple clusters as long as the XIOS versions are within the same major release family or are compatible with the XMS version.
Given the XIOS versions listed:
* Two clusters running XIOS 4.0.2-80
* Two clusters running XIOS 4.0.4-41
* Two clusters running XIOS 4.0.25-27
* Two XtremIO X2 clusters running XIOS 6.0.1-27_X2
All the clusters running XIOS version 4.x can be managed by a single XMS because they belong to the same major release family. The XtremIO X2 clusters running XIOS 6.0.1-27_X2 would typically require a separate XMS that supports the 6.x family. However, it is possible for a single XMS to manage both 4.x and 6.x clusters if the XMS version is compatible with both, which is often the case with newer XMS versions that support a wider range of XIOS versions.
Therefore, the minimum number of XMS machines required to manage all the listed clusters, assuming compatibility, is one.
References:
* Dell community discussions on vXMS version compatibility1.
* Introduction to XtremIO X2 Storage Array document, which may include details on XMS and XIOS compatibility2.
* XtremIO Bulletin Volume I-A 2022 for XIOS and XMS version guidelines3.
NEW QUESTION # 25
What are the I/O Elevators?
- A. Setting which controls for how long the ESX host attempts to login to the iSCSI target before failing the login.
- B. The amount of SCSI commands (including I/O requests) that can be handled by a storage device at a given time.
- C. The maximum number of consecutive "sequential" I/Os allowed to be submitted to storage.
- D. 1/O scheduling algorithm which controls how I/O operations are submitted to storage.
Answer: D
Explanation:
Explore
I/O Elevators refer to the I/O scheduling algorithms used in operating systems to control how I/O operations are submitted to storage12.These algorithms, also known as elevators, determine the order in which I/O requests from different processes or devices are serviced by the underlying hardware, such as hard drives or solid-state drives (SSDs)12.The goal of these algorithms is to improve the efficiency of data access and reduce the time wasted by disk seeks3.
The other options provided are not typically referred to as I/O Elevators:
* Option OB, "The maximum number of consecutive 'sequential' I/Os allowed to be submitted to storage", refers to a specific parameter of a storage system, not an I/O Elevator4.
* Option OC, "Setting which controls for how long the ESX host attempts to login to the iSCSI target before failing the login", refers to a specific setting in ESXi host configuration, not an I/O Elevator567.
* Option OD, "The amount of SCSI commands (including I/O requests) that can be handled by a storage device at a given time", refers to the command handling capacity of a storage device, not an I/O Elevator89.
Therefore, the verified answer isA.I/O scheduling algorithm which controls how I/O operations are submitted to storage, as it accurately describes what I/O Elevators are according to the Dell XtremIO Design Achievement document10and other sources123.
NEW QUESTION # 26
Which XtremlO X2 hardware component provides a backup power source to save journaling data during an unplanned emergency shutdown?
- A. PSU
- B. SuperCap
- C. NVRAM
- D. BBU
Answer: B
Explanation:
In the event of an unplanned emergency shutdown, the XtremIO X2 hardware component that provides a backup power source to save journaling data is the SuperCapacitor (SuperCap). The SuperCap is designed to maintain power to the system long enough to ensure that all in-flight writes are committed to non-volatile memory, preserving data integrity.Unlike a battery backup unit (BBU) which may provide power for a longer duration, the SuperCap is specifically designed for short-term power retention to protect data during transient power interruptions1.
References:
* The User Guide for XtremIO, which includes power down and power up procedures, would typically detail the role of the SuperCap in emergency shutdown scenarios1.
* Additional information on the hardware components and their functions can be found in the Reference Architecture Guide for Dell EMC XtremIO2.
NEW QUESTION # 27
A customer has Microsoft Windows servers running Microsoft Multipath IO (MPIO). Which path selection policy should be set for optimal performance when connected to anXtremlO cluster?
- A. Round Robin
- B. Weighted Paths
- C. Least Queue Depth
- D. Least Blocks
Answer: A
Explanation:
For Microsoft Windows servers running MPIO, the optimal path selection policy when connected to an XtremIO cluster is Round Robin. This policy allows for load balancing across all available paths by distributing I/O evenly, which can lead to better performance and utilization of the storage resources.The Round Robin policy ensures that no single path is overloaded with I/O requests, which helps in maintaining consistent performance levels1.
References:
* The Dell EMC SC Series: Microsoft Multipath IO Best Practices document provides insights into the recommended path selection policies for optimal performance2.
* Additional information on MPIO and path selection policies can be found in the Dell EMC knowledge base articles1.
NEW QUESTION # 28
Which slot on a physical XtremIO X2 XMS holds the server's boot disk?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
The Dell XtremIO X2 XMS is designed with a specific slot for the server's boot disk. According to the documentation and specifications provided by Dell, the boot disk is located in a designated slot within the system.While the exact slot number is not explicitly mentioned in the snippets provided, the Dell XtremIO design documents, such as the support documentation1, technical whitepapers2, and specification sheets345, contain detailed information about the system architecture and component layout, including where the boot disk is situated.
For a verified and accurate answer, one should refer to the official Dell XtremIO design documents, which provide a comprehensive overview of the system, including detailed diagrams and descriptions of the hardware components and their respective slots. These documents are accessible through Dell's official support page or technical resources related to the XtremIO X2 product line.
NEW QUESTION # 29
A customer's environment is expected to grow significantly (more than 150 TB physical capacity) over the next year. Which solution should be recommended?
- A. Start with X2-R cluster and add additional X2-S X-Bricks as needed
- B. Start with X2-R cluster and add additional X2-R X-Bricks as needed
- C. Start with a four X-Brick X2-S cluster and add additional X2-S X-Bricks as needed
- D. Start with X2-S cluster and add additional X2-S X-Bricks as needed
Answer: B
Explanation:
For environments expected to grow significantly (more than 150 TB physical capacity), it is better to start with an X2-R cluster and add additional X2-R X-Bricks as needed. X2-R configurations are designed for a variety of use cases and can handle larger capacities and high-performance requirements.
NEW QUESTION # 30
......
EMC D-XTR-DS-A-24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Download Latest & Valid Questions For EMC D-XTR-DS-A-24 exam: https://www.passleadervce.com/Storage-Administrator/reliable-D-XTR-DS-A-24-exam-learning-guide.html
Ensure Success With Updated Verified D-XTR-DS-A-24 Exam Dumps: https://drive.google.com/open?id=1igGCl7CgXleKWsji40HKPZyye7f5TJEf