Get New 2022 Valid Practice CCNP Data Center 300-615 Q&A - Testing Engine [Q24-Q39]

Share

Get New 2022 Valid Practice CCNP Data Center 300-615 Q&A - Testing Engine

300-615 Dumps PDF - 100% Passing Guarantee


Cisco 300-615 Exam Topics:

SectionWeightObjectives
Automation15%- Troubleshoot automation and scripting tools
  • EEM
  • Scheduler

- Troubleshoot programmability

  • Bash shell and guest shell for NX-OS
  • REST API
  • JSON and XML encodings
Network25%- Troubleshoot routing protocols
  • OSPFv2, OSPFv3
  • MP-BGP
  • PIM
  • FHRP (HSRP, VRRP)

- Troubleshoot switching protocols, such as RSTP+, LACP, and vPC
- Troubleshoot overlay protocols, such as VXLAN EVPN and OTV
- Troubleshoot Application Centric Infrastructure

  • Fabric discovery
  • Access policies
  • VMM domain integration
  • Tenant policies
  • Packet flow (unicast, multicast, and broadcast)
  • External connectivity
Management and Operations20%- Troubleshoot firmware upgrades, packages, and interoperability
- Troubleshoot integration of centralized management
- Troubleshooting network security
  • Fabric binding and port security
  • AAA and RBAC
  • First-hop security such as dynamic ARP, DHCP snooping, and port security
  • Troubleshoot CoPP

- Troubleshoot ACI security domains and role mapping
- Troubleshoot data center compute security

  • Troubleshoot AAA and RBAC
  • Troubleshoot key management

- Troubleshoot storage security

  • AAA and RBAC
  • Port security
  • Fabric binding


The Cisco 300-615 exam is the perfect option for those individuals who want to validate their skills in troubleshooting the data center along with its network, storage, automation, operations, and more. This is one of the concentration tests designed for earning the CCNP Data Center certification, which must be taken after the core exam, known as 350-601 DCCOR. For those students who pass only the 300-615 test, the vendor will grant the Cisco Certified Specialist – Data Center Operations certificate.

 

NEW QUESTION 24
Refer to the exhibit.

The script fails to bring up Ethernet 1/2 when Ethernet 1/1 goes down. Which change enables the script to run as intended?

  • A. Include an action to manually shut down Ethernet 1/1
  • B. Configure an enable action
  • C. Set the port VLAN
  • D. Add an action to configure the terminal

Answer: D

 

NEW QUESTION 25
A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two actions optimize the traffic? (Choose two.)

  • A. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch.
  • B. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices.
  • C. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch.
  • D. Disable first-hop redundancy.
  • E. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices.

Answer: B,D

 

NEW QUESTION 26
Refer to the exhibit. A network engineer deploys scripts to the guest shell of a Cisco Nexus switch. The scripts fail to operate properly due to the limited CPU and file system resources that are assigned by default to the guest shell. The engineer allocated more memory and disk space to the guest shell, but the application continues to fail. Which action resolves the issue?

  • A. Disable and enable bash shell
  • B. Upgrade the guest shell
  • C. Reboot the guest shell
  • D. Redeploy the bash shell

Answer: C

Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKDCN-2015.pdf

 

NEW QUESTION 27
Drag and drop the commands from the left onto the correct categories on the right.

Answer:

Explanation:

 

NEW QUESTION 28
Refer to the exhibit.

Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?

  • A. Upgrade the firmware of the infrastructure firmware by using the force option.
  • B. Acknowledge the primary fabric interconnect.
  • C. Remove the service pack from the subordinate fabric interconnect.
  • D. Clear the startup version of the default infrastructure pack.

Answer: D

 

NEW QUESTION 29
Refer to the exhibit.

The cURL command fails to complete. Which action resolves the problem?

  • A. Change ".json" to ".xml" at the end of the URL.
  • B. Include -p "password" in the command.
  • C. Remove ".json\" from the URL.
  • D. Add -H "X-Auth-Token" to the command.

Answer: B

 

NEW QUESTION 30
Refer to the exhibit.

A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?

  • A. Enable ISSD after the downgrade is complete.
  • B. Roll back to the original image.
  • C. Shut and no shut the interfaces to the FEX.
  • D. Reload the switch.

Answer: B

 

NEW QUESTION 31
Refer to the exhibit.

Refer to the exhibit. A network engineer creates an EEM script to trigger an SNMP notification when a user enters configuration mode, but the trap is not received when the condition is met. Which action resolves the issue?

  • A. Append action 2.0 cli "conf t" to the script
  • B. Append action 2.0 event-default to the script
  • C. Modify snmp-trap strdata "Configuration changed" to syslog msg Configuration changed
  • D. Modify cli match "conf t" to "snmp match "conf t"

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_12eem.html

 

NEW QUESTION 32
Refer to the exhibit.

The HSRP instance on both switches is showing as active. Which action resolves the issue?

  • A. Allow VLAN 100 between the switches.
  • B. Configure the IP address of N9K-B on the same subnet as N9K-A.
  • C. Configure preempt on only one of the switches.
  • D. Configure the HSRP timers to be the same.

Answer: A

 

NEW QUESTION 33
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?

  • A. Disable the hardware-telemetry feature
  • B. Disable the software-telemetry feature
  • C. Disable the telemetry feature
  • D. Disable the inband-telemetry feature

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nexus-9000-series-nx-os-programmability-guide-93x/b-cisco-nexus-9000-series-nx-os-programmability-guide-93x_chapter_0101011.html

 

NEW QUESTION 34
Refer to the exhibit.

A PC belongs to VLAN 68 The user experiences a large amount of packet loss when communicating with hosts that are outside of VLAN 68. Which action resolves the problem?

  • A. Enable the peer-gateway feature
  • B. Configure ip arp synchronization on both switches.
  • C. Remove the HSRP configuration
  • D. Replace HSRP with GLBP

Answer: A

Explanation:
Explanation
I assume that the PC is sending traffic with destination MAC of Nexus physical interfaces. If more snap shots about this question are available, please share.

 

NEW QUESTION 35
Refer to the exhibit.

The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?

  • A. IP address of the SNMP server
  • B. event statement
  • C. policy-default action statement
  • D. event-default action statement

Answer: D

 

NEW QUESTION 36
A network engineer experiences the error "DDR3_P1_B1_ECC" when upgrading Cisco UCS firmware. Which action resolves the issue?

  • A. Reflash the controller firmware
  • B. Reflash the DIMM
  • C. Reset the DIMM
  • D. Reset the BMC firmware

Answer: C

 

NEW QUESTION 37
Refer to the exhibit.

Refer to the exhibits. An engineer is implementing the SAN based on the Cisco MDS 9000 Series Switches. When operating the environment, the engineer encounters the error shown. Which action resolves the issue?

  • A. Copy VSAN 101 to the fabric binding database on the MDS-1 switch
  • B. Add the World Wide Name of the neighboring switch to the MDS-1 switch
  • C. Configure the port security feature on the MDS-1 switch
  • D. Enable VSAN 101 on the peer MDS 2 switch fabric interconnect

Answer: B

Explanation:
Reference:
https://overlaid.net/2014/08/22/fc-security-for-ccie-dc-fabric-binding/

 

NEW QUESTION 38
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.

Answer:

Explanation:

 

NEW QUESTION 39
......


Exam Overview

The 300-615 exam has about 60 questions of various types, such as multiple choice, drag and drop, fill-in-the-blank, and testlet. All the items should be cleared within 90 minutes and you are supposed to gain 825 points or more to become eligible for the professional-level certification. It will be possible to take this test in English, while other languages are not available for it. Its fee is $300 and the learners need to pay and schedule this exam via the Pearson VUE website. There you can choose whether to sit for it online or at one of the testing centers. Each option has certain policies and requirements that you need to fulfill, so don’t forget to check this information before taking the exam.

 

300-615 Braindumps Real Exam Updated on Aug 29, 2022 with 150 Questions: https://www.passleadervce.com/CCNP-Data-Center/reliable-300-615-exam-learning-guide.html

Latest 300-615 PDF Dumps & Real Tests Free Updated Today: https://drive.google.com/open?id=1vjrafMkM_qYInCFJBUkAXOgY7P2934lA