New 2024 Guaranteed Success with PassLeaderVCE JN0-363 Dumps Juniper PDF Questions
Exceptional Practice To Service Provider Routing and Switching, Specialist (JNCIS-SP) Pass the First Time
Juniper JN0-363 exam is designed for professionals who want to prove their expertise in service provider routing and switching. JN0-363 exam is the industry standard for service provider networks and is recognized globally. The JN0-363 exam is a specialist level certification that tests the candidate's knowledge and skills in service provider routing and switching technologies.
NEW QUESTION # 37
Referring to the exhibit, what must be included in the Route1 configuration when establishing an EBGP session with the ISP?
- A. The BGP session type internal must be specified.
- B. A local AS must be specified.
- C. The BGP session type external must be specified.
- D. A local address must be specified.
Answer: D
NEW QUESTION # 38
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
- A. 172.26.4.0730
- B. 172.18.1.0/24
- C. 192.168.1.3
- D. 192.108.1.4
Answer: A
NEW QUESTION # 39
Referring to the exhibit, you have configured an aggregate route that represents the 172.21.0.0/24, 172.21.1.0/24, and 172.21.2.0/24 networks. However, when you view the routing table, your new route hidden.
Which action would you perform to determine the problem?
- A. Verify that you have configured a policy on the device to accept aggregate routes.
- B. Verify that you have defined a metric value for the aggregate route.
- C. Verify that you have active contributing routes on the device.
- D. Verify that you have set the preference to a lower default value.
Answer: D
NEW QUESTION # 40
Which two statements are true about IP and GRE tunnels? (Choose two.)
- A. The TTL field is changed in the inner IP packet header
- B. The protocol field is changed in the inner IP packet header
- C. Tunnel traffic is encrypted
- D. Tunnel endpoints need a valid route to the remote endpoint
Answer: A,D
NEW QUESTION # 41
Which statement is correct about the FE80;:/10 prefix?
- A. This prefix range is not reserved.
- B. This prefix range is reserved for multicast applications
- C. This prefix range is used for the link local address.
- D. This prefix range is used on the loopback interface.
Answer: C
NEW QUESTION # 42
What are two bridging concepts that are used to maintain an Ethernet switching table? (Choose two.)
- A. aging
- B. learning
- C. exporting
- D. timing
Answer: A,B
NEW QUESTION # 43
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
What is the result of applying this policy?
- A. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
- B. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
- C. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
- D. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
Answer: D
NEW QUESTION # 44
Click the Exhibit button.
The routers shown in the exhibit are configured for segment routing.
In this scenario, what is the adjacency SID that Router B advertises to Router A?
- A. 0
- B. 1
- C. 10.1.1.1
- D. 10.1.1.2
Answer: D
Explanation:
Currently, Junos OS enables you to configure a SPRING node SID for IPv4 and IPv6 address families for each routing instance. This node SID is attached to an IPv4 and IPv6 router ID if the router ID is configured on the loopback interface. Otherwise, the lowest IP address assigned to the loopback interface is chosen as the node SID. Configuring a node SID through policy allows you to choose the loopback address that gets the node SID. If the node SID configuration exists and a policy is defined for node SID selection for the same prefix, then the policy configuration takes precedence.
NEW QUESTION # 45
What are two types of SlDs used in segment touting? (Choose two.)
- A. interface
- B. node
- C. adjacency
- D. link
Answer: B,C
Explanation:
https://zartmann.dk/sr-intro/
NEW QUESTION # 46
Click the Exhibit.
Referring to the exhibit, what is the result of applying this policy?
- A. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
- B. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
- C. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
- D. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.
Answer: A
NEW QUESTION # 47
Which MPLS feature works with Constrained Shortest Path First (CSPF) to protect against the primary and secondary paths using the same link?
- A. explicit null configuration
- B. fate-sharing
- C. policy control over LSP selection
- D. LSP metrics
Answer: B
NEW QUESTION # 48
Which IPv6 address type is used as an identifier for a group of IPv6 interfaces that might belong to different nodes, typically, the nearest node?
- A. multicast
- B. broadcast
- C. anycast
- D. unicast
Answer: C
NEW QUESTION # 49
Which three statements are true about the BGP community attribute? (Choose three.)
- A. There are three well-known communities.
- B. Routing policies can be simplified using BGP communities.
- C. Only well-known communities can be passed between AS networks.
- D. Communities can be used to signal local preference in other AS networks.
- E. Communities are used in the route selection process.
Answer: A,B,D
NEW QUESTION # 50
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
- A. Root protection
- B. MAC movement protection
- C. Loop protection
- D. BPDU protection
Answer: C
NEW QUESTION # 51
Click the Exhibit button.
Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?
- A. The IP header adds 24 bytes to the packet
- B. The GRE header adds 20 bytes to the packet
- C. The IP header adds 20 bytes to the packet
- D. The GRE header adds 24 bytes to the packet
Answer: D
NEW QUESTION # 52
Click the Exhibit.
You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?
- A. Type external
- B. Type internal
- C. Export <policy name>
- D. As -override
Answer: B
NEW QUESTION # 53
......
Juniper JN0-363 certification exam tests the candidate’s understanding of network routing protocols and their ability to configure and troubleshoot Juniper Networks’ router platforms. JN0-363 exam consists of multiple-choice questions and simulations that measure the candidate's skills in configuring and managing Junos OS platforms. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification exam also validates the candidate's understanding of network security principles and their ability to use Juniper Networks security features to secure the network.
JN0-363 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.passleadervce.com/JNCIS-SP/reliable-JN0-363-exam-learning-guide.html
Best Quality Juniper JN0-363 Exam Questions: https://drive.google.com/open?id=1QfkFFlPeV9jCsk9fWuZPG5hDqpMKYkhb