Practice DCS-IE DES-6322 exam. Online Exam Practice Tests with detailed explanations! Pass DES-6322 with confidence!
DES-6322 - Specialist - Implementation Engineer, VxRail Exam Practice Tests 2021 | PassLeaderVCE
NEW QUESTION 21
What is the maximum number of supported nodes for a VxRail cluster running on a 1 GbE network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 22
Which vSAN rules are configured for the VXRAIL-SYSTEM-STORAGE-PROFILE?
- A. Failures to tolerate - 1 failure RAID-1 (Mirroring)
Object space reservation - Thin provisioning - B. Failures to tolerate - 2 failures RAID-1 (Mirroring) Object space reservation - Thin provisioning
- C. Failures to tolerate - 1 failure RAID-1 (Mirroring) Object space reservation - Thick provisioning
- D. Failures to tolerate - 1 failure RAID-5 (Erasure Coding) Object space reservation - Thick provisioning
Answer: B
NEW QUESTION 23
What is the correct CL! command to collect only the VxRail Manager logs?
- A. vm-supportsh -c
- B. vc-support sh -v
- C. generateLogBundle py -v
- D. generateFullBundle.py -c
Answer: D
NEW QUESTION 24
A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?
- A. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-1 (Mirroring)
- B. Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
- C. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - no data redundancy
- D. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
Answer: B
NEW QUESTION 25
What Is a supported method for racking nodes for a new VxRail deployment?
- A. With server exhaust facing the cold aisle
- B. Starting with node 1 at the top of the rack
- C. In the rack hosting the network equipment used to manage the iDRAC
- D. With PDUs connected to 120v single phase 5-amp electrical circuits
Answer: C
NEW QUESTION 26
A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches How should the switch ports used for VxRail be configured to achieve a successful deployment?
- A. Set the port type to edge
- B. Set the port mode to access
- C. Enable MLD snooping and querier
- D. Enable link aggregation for all ports
Answer: A
NEW QUESTION 27
Which command is used to restart the Loudmouth process on an ESXi node?
- A. systemcti restart vmware-loudmouth
- B. /usr/IibAmiware/loudmouth/bin/loudmouthd restart
- C. systemcti restart loudmouth
- D. /etc/int.d/loudmouth restart
Answer: D
NEW QUESTION 28
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?
- A. PCIe network card must be added to all nodes
- B. Node hardware must be identical to the other three nodes
- C. New node must be at the same VxRail version as existing nodes
- D. Node requires only the same drive configuration
Answer: D
NEW QUESTION 29
Use the VxRail simulator to explore the system. What is the presented configuration?
Note: It fs necessary to close (x) the simulator window before you can select a response to this question.
- A. Internal vCenter and external DNS
- B. Internal vCenter and Internal DNS
- C. External vCenter and internal DNS
- D. External vCenter and external DNS
Answer: A
NEW QUESTION 30
What are the requirements for a customer-supplied VDS in a VxRail deployment?
- A. 4 or 8 uplinks
Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN - B. 4 or 8 uplinks
Port groups for Discovery, Management, vMotion, and vSAN only - C. 2 or 4 uplinks
Port groups for Discovery, Management, vMotion, and vSAN only - D. 2 or 4 uplinks
Port groups for Discovery, Management vCenter Server, vMotion, and vSAN
Answer: B
NEW QUESTION 31
A VxRail implementation engineer is validating the network environment with NVT.
The proposed switch configuration is shown in the exhibit.
The ToR Switch information file is available.
- A. Use the VxRail simulator to set up NVT for switch validation.
Import the switch Information and tag the ports based on the exhibit.
Answer: A
Explanation:
Send your suggestions for this question.
NEW QUESTION 32
An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?
- A. Power distribution supports only the power rating of a single node
- B. Service laptop is on the same IP network as the iDRACs
- C. Redundant power zones exist with adequate power cables
- D. At least 24 in (61 cm) of clearance exists in front of and behind the cabinet
Answer: C
NEW QUESTION 33
A VxRail cluster is being deployed in a DMZ environment. What is the recommended deployment option?
- A. Internal vCenter Server with internal DNS
- B. Internal vCenter Server with external DNS
- C. External vCenter Server with customer-supplied VDS
- D. External vCenter Server with VxRail-deployed VDS
Answer: B
NEW QUESTION 34
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.
Use the VxRail simulator to describe why the host is Incompatible.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
- A. Invalid vCenter 5erver license
- B. Insufficient number of vSphere licenses
- C. Firmware of ESXi host needs to be updated
- D. bmc and bios are running older versions
Answer: A
NEW QUESTION 35
A VxRail solution will be deployed with the embedded vCenter and an external DNS At a minimum, for which components must DNS records be created?
- A. vCenter Server Platform Services Controller, and iDRAC
- B. vCenter Server, ESXi hosts, and VxRail Manager
- C. ESXi Hosts, VxRail Manager and iDRAC
- D. vCenter Server Platform Services Controller, and VxRail Manager
Answer: B
NEW QUESTION 36
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?
- A. Extensive maintenance
- B. Temporary maintenance
- C. Permanent removal of host from cluster
- D. Shutdown of an entire cluster
Answer: A
NEW QUESTION 37
Match each VxRail, data protection solution with its functionality.
Answer:
Explanation:
NEW QUESTION 38
From what location should NVT for VxRail be run?
- A. Jump server on a different network
- B. Workstation on the same network as VxRail Manager
- C. VxRail network Top of Rack switch
- D. Laptop connected to the first VxRail ESXi node
Answer: B
NEW QUESTION 39
Match each IDRAC Maintenance page tab to its description.
Answer:
Explanation:
NEW QUESTION 40
A VxRail Manager VM must be configured as follows:
* IP address: 192 168.10.16
* Net mask: 255.255.255.0
* Gateway: 192 168 10 254
Which command must be used?
- A. vxrail-primary -config --vxrail-address 192.168.10 16 --vxrail-netmask 255 255 255 0 -vxrail-gateway 192.168,10 254
- B. vxrail-network -config --vxrail-address 192.166 10 16 --vxrail-netmask 255 255.255 0 --vxrail-gateway 192.168.10.254
- C. vxrail-prrmary -config --ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254
- D. vxrail-network-config --ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254
Answer: A
NEW QUESTION 41
What is a characteristic of the VxRail S Series node?
- A. Form factor of 2U4N
- B. Form factor of 1U1N
- C. Large form factor drives
- D. Dense Flash disks
Answer: B
NEW QUESTION 42
A VxRail API request has been executed and the user account does not have vCenter privileges to perform the task.
What code is returned?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 43
A VxRail solution will be deployed with the embedded vCenter and an external DNS At a minimum, for which components must DNS records be created?
- A. vCenter Server Platform Services Controller, and VxRail Manager
- B. vCenter Server Platform Services Controller, and iDRAC
- C. vCenter Server, ESXi hosts, and VxRail Manager
- D. ESXi Hosts, VxRail Manager and iDRAC
Answer: A
NEW QUESTION 44
From what environment must a network administrator run VxRail network validation?
- A. Windows PowerShell command prompt
- B. Same subnet as VxRail Management Network
- C. Top of Rack switches
- D. VxRail Deployment Wizard
Answer: C
NEW QUESTION 45
Use the VxRail simulator to explore the system. What is the presented configuration?
Note: It fs necessary to close (x) the simulator window before you can select a response to this question.
- A. Internal vCenter and external DNS
- B. Internal vCenter and Internal DNS
- C. External vCenter and internal DNS
- D. External vCenter and external DNS
Answer: A
NEW QUESTION 46
......
Get instant access to DES-6322 practice exam questions: https://drive.google.com/open?id=1NH6ry2lSW-8KTBYjnqR-GKTQgJeUC-rl
The best DES-6322 exam study material and preparation tool is here: https://www.passleadervce.com/DCS-IE/reliable-DES-6322-exam-learning-guide.html