
Steps Necessary To Pass The 2V0-01.19 Exam from Training Expert PassLeaderVCE
Valid Way To Pass VCP-DCV 2019's 2V0-01.19 Exam
The VMware 2V0-01.19 exam, also known as the vSphere 6.7 Foundations 2019, is meant for IT professionals that want to validate their grasp of the basic concepts related to deploying and configuring VMware vSphere 6.7 technology in business environments. Once aced the VMware 2v0-01.19 test, the candidate becomes eligible to acquire different professional-level certifications.
NEW QUESTION 38
What three steps must be taken when removing a host from a vSAN-enabled cluster? (Choose three.)
- A. Create at least one vSphere Standard Switch.
- B. Remove VMkernel port with vSAN traffic checkbox checked.
- C. Place the host into maintenance mode with Full Migration option selected.
- D. Remove the host from vSAN cluster.
- E. Remove disks from diskgroups, remove disk groups.
Answer: C,D,E
Explanation:
Explanation/Reference: http://www.vmwareminds.com/2017/07/02/remove-host-from-the-vsan-cluster/
NEW QUESTION 39
A vSphere administrator takes a snapshot before logging into a VM to preserve the current state in case of a problem.
Assuming this process is repeated every day for over 30 days, what two results will happen? (Choose two.)
- A. The virtual machine can end up consuming more space on the datastore than assigned.
- B. The administrator has successfully cloned the VM 30 times.
- C. The administrator will have backups for the entire month.
- D. The virtual machine's performance will decrease.
Answer: A,D
Explanation:
Explanation/Reference:
Reference: https://kb.vmware.com/s/article/1025279
NEW QUESTION 40
A vSphere administrator sees the alarm:
vSphere HA virtual machine failed to failover
This occurred for a number of virtual machines on a particular ESXi host in a cluster with vSphere High Availability (HA) enabled. The virtual machines guest operating systems never reported a power event.
What occurred?
- A. The virtual machines were vMotioned off of the ESXi host.
- B. The ESXi host is still running but has disconnected from the network.
- C. The previous virtual machine cloning operations failed to complete.
- D. The ESXi host failed and vSphere HA successfully failed over the virtual machines.
Answer: D
NEW QUESTION 41
What load balancing appliance does VMware recommended for deploying a vRealize Log Insight cluster?
- A. Integrated Load Balancer
- B. VMware NSX Load Balancer
- C. Citrix NetScaler
- D. F5 Big-IP
Answer: A
NEW QUESTION 42
Which two resource types can be limited on the vApp level? (Choose two.)
- A. Storage
- B. CPU
- C. Memory
- D. Network
Answer: B,C
NEW QUESTION 43
What are two valid methods to deploy an OVF template which consists of two or more VMs? (Choose two.)
- A. Deploy on a vSphere DRS enabled cluster.
- B. Deploy on the VMware vSphere Hypervisor.
- C. Deploy on the standalone host connected to vCenter Server.
- D. Deploy on a vSphere HA enabled cluster.
Answer: A,B
NEW QUESTION 44
What are the two minimum configurations of a disk group in a vSAN host? (Choose two.)
- A. 1 SSD drive for the caching tier and 1 or more SSDs for the capacity tier
- B. 2 or more SSD drives for the caching tier and 2 or more HDDs for the capacity tier
- C. 2 or more SSD drives for the caching tier and 2 or more SSDs for the capacity tier
- D. 1 SSD drive for the caching tier and 1 or more HDDs for the capacity tier
Answer: A,D
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-
4B738A10-4506-4D70-8339-28D8C8331A15.html
NEW QUESTION 45
A vSphere administrator sees the alarm:
vSphere HA virtual machine failed to failover
This occurred for a number of virtual machines on a particular ESXi host in a cluster with vSphere High Availability (HA) enabled. The virtual machines guest operating systems never reported a power event.
What occurred?
- A. The virtual machines were vMotioned off of the ESXi host.
- B. The ESXi host is still running but has disconnected from the network.
- C. The previous virtual machine cloning operations failed to complete.
- D. The ESXi host failed and vSphere HA successfully failed over the virtual machines.
Answer: D
Explanation:
Explanation
NEW QUESTION 46
A vSphere administrator notices that sometimes they receive poor network throughput for multiple port groups that reside on a vSwitch with multiple physical uplinks (vmnics). The configuration on the ESXi host is identical to other hosts that are working properly in the same cluster.
What should be done next?
- A. Add additional port groups to the vSwitch.
- B. Restart Management agents in ESXi Direct Console User Interface (DCUI).
- C. Add additional resources to the virtual machines that are powered on.
- D. Alter the failover order of the vmnics until a bad vmnic is found.
Answer: C
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.monitoring.doc/GUID- C4EA86FD-95CB-4DE7-A9E3-63F6BFC1A268.html
NEW QUESTION 47
A vSphere administrator notices that sometimes they receive poor network throughput for multiple port groups that reside on a vSwitch with multiple physical uplinks (vmnics). The configuration on the ESXi host is identical to other hosts that are working properly in the same cluster.
What should be done next?
- A. Add additional port groups to the vSwitch.
- B. Restart Management agents in ESXi Direct Console User Interface (DCUI).
- C. Add additional resources to the virtual machines that are powered on.
- D. Alter the failover order of the vmnics until a bad vmnic is found.
Answer: C
NEW QUESTION 48
Which type of network traffic is used for vSphere High Availability (HA) by default?
- A. Management network traffic
- B. VM Network traffic
- C. iSCSI Port Binding network traffic
- D. vMotion network traffic
Answer: A
NEW QUESTION 49
What three steps are necessary to enable Jumbo Frames for use with an iSCSI storage array? (Choose three.)
- A. Configure the MTU on the physical switch.
- B. Configure the MTU on the LAG group.
- C. Configure the MTU on the VTEP.
- D. Configure the MTU on the virtual switch.
- E. Configure the MTU on the VMKernel port.
Answer: A,D,E
NEW QUESTION 50
Which two scenarios can cause a VM to appear orphaned in the vSphere Web Client? (Choose two.)
- A. The VM was unregistered from the ESXi host directly.
- B. The VM had an unsuccessful migration within a vSphere DRS cluster.
- C. The VM was removed from the vCenter Server.
- D. The ESXi host had an unsuccessful failover event in vSphere HA.
Answer: A,D
NEW QUESTION 51
Which two formats are supported for exporting a VM to a storage media? (Choose two.)
- A. ISO
- B. EXE
- C. OVA
- D. OVF
Answer: C,D
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.vm_admin.doc/GUID- AE61948B-C2EE-436E-BAFB-3C7209088552.html
NEW QUESTION 52
Which three options are available when applying a customization Specification to an existing virtual machine?
(Choose three.)
- A. Import a specification
- B. Modify a specification
- C. Select an existing specification.
- D. Create a specification
- E. Create a specification from an existing specification.
Answer: A,C,D
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.vm_admin.doc/GUID- EB5F090E-723C-4470 B640-50B35D1EC016.html
NEW QUESTION 53
A vSphere administrator is required to apply security hardening policies following the VMware vSphere Hardening Guide recommendations.
Which tool enables native compliance reporting for these guidelines?
- A. VMware AirWatch
- B. VMware vCenter Server
- C. VMware vSphere Update Manager
- D. VMware vRealize Operations Manager
Answer: D
NEW QUESTION 54
Which type of network traffic is used for vSphere High Availability (HA) by default?
- A. Management network traffic
- B. VM Network traffic
- C. iSCSI Port Binding network traffic
- D. vMotion network traffic
Answer: A
Explanation:
Explanation/Reference:
Reference: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.avail.doc/GUID- B1906BCD-E538-4FFF-AAE9-5403FE253F38.html
NEW QUESTION 55
......
Are There Any Key Requirements?
The vendor doesn't set any specific prerequisites for 2V0-01.19 exam. Still, there is a profile of the most suitable audience. Therefore, it's recommended for candidates to have 6-12 months of experience with vSphere networking, compute, virtual machines, and storage as well as have skills in their installation, administering, and configuring. The applicants who are most likely to succeed in this certification path also have 1-2 years of general working background in the IT field.
VMware 2V0-01.19 Exam Certification Details:
| Exam Code | 2V0-01.19 |
| Duration | 105 minutes |
| Schedule Exam | PEARSON VUE |
| Sample Questions | VMware 2V0-01.19 Sample Questions |
| Recommended Training / Books | VMware vSphere: Install, Configure, Manage [6.7] VMware vSphere: Optimize and Scale [6.7] VMware vSphere: Fast Track [6.7] |
| Number of Questions | 65 |
| Exam Name | VMware vSphere 6.7 Foundations |
| Exam Price | $125 USD |
| Passing Score | 300 / 500 |
All 2V0-01.19 Dumps and VMware vSphere 6.7 Foundations Exam 2019 Training Courses: https://www.passleadervce.com/VCP-DCV-2019/reliable-2V0-01.19-exam-learning-guide.html