Updated Jan-2022 Exam Engine for 2V0-41.20 Exam Free Demo & 365 Day Updates
Exam Passing Guarantee 2V0-41.20 Exam with Accurate Quastions!
Professional VMware NSX-T Data Center 2V0-41.20 Exam Certified Professional salary
The estimated average salary of Professional VMware NSX-T Data Center 2V0-41.20 certified professional is listed below:
- England: 72,000 POUND
- India: 7,028,000 INR
- Europe: 80,000 EURO
- United States: 95,000 USD
NEW QUESTION 54
Which two tools are used to configure centralized logging in NSX-T Data Center? (Choose two.)
- A. vRealize Log Insight
- B. Syslog Server
- C. vRealize Network Insight
- D. vRealize Operations
- E. vRealize Automation
Answer: A,B
NEW QUESTION 55
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. MTU 1400
- B. MTU 1600
- C. MTU 1500
- D. vSphere Distributed Switch 7.0
- E. vSphere Distributed Switch 6.5
Answer: B,D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895-F37E5A7B7BAE.html
NEW QUESTION 56
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get host-switch <Host-Switch-Name> tunnels
- B. get host-switch <Host-Switch-Name> tunnel status
- C. get transport-node tunnel state
- D. get transport-node tunnel status
Answer: A
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 57
Which tool could be used to inspect the path of a packet in the data plane?
- A. Port Mirroring Session
- B. Netflow
- C. Port Connection
- D. Traceflow
Answer: D
NEW QUESTION 58
An NSX administrator has configured a KVM hypervisor as a transport node.
Which kernel module on KVM implements a N-VDS?
- A. dvswitch
- B. openvswitch
- C. etherswitch
- D. nsx-vswitch
Answer: B
NEW QUESTION 59
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
NEW QUESTION 60
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)
- A. HTTPS
- B. SSH
- C. SSL
- D. TCP
- E. TLS
- F. UDP
Answer: D,E,F
NEW QUESTION 61
Which three protocols could an NSX administrator use to transfer log messages to a remote log server?
(Choose three.)
- A. HTTPS
- B. SSH
- C. SSL
- D. TCP
- E. TLS
- F. UDP
Answer: D,E,F
Explanation:
Explanation
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-p
NEW QUESTION 62
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. Downlink interface
- B. Loopback Router Port
- C. Service interface
- D. VLAN Uplink
Answer: C
NEW QUESTION 63
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)
- A. esxcli network ip interface ipv4 get
- B. esxcfg-vmknic -1
- C. net-dvs
- D. esxcfg-nics -1
- E. esxcli network nic list
Answer: A,B
NEW QUESTION 64
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?
- A. set cli ssh timeout 0
- B. set cli-timeout 0
- C. set esxcli ssh session off
- D. nsxcli ssh session on
Answer: B
NEW QUESTION 65
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get host-switch <Host-Switch-Name> tunnels
- B. get host-switch <Host-Switch-Name> tunnel status
- C. get transport-node tunnel state
- D. get transport-node tunnel status
Answer: A
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20host-switch%20%3Chost-switch-name%3E%20tunnels
NEW QUESTION 66
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?
- A. Create a secondary vNIC on each quest VM for SVM communication.
- B. Add partner SVMs to an edge cluster.
- C. Centralize partner SVMs in a service cluster.
- D. Place a partner SVM on each compute cluster node.
Answer: A
NEW QUESTION 67
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service nsx-manager logging-level debug
- B. set service manager logging-level debug
- C. set service nsx-manager log-level debug
- D. set service manager log-level debug
Answer: D
NEW QUESTION 68
A user is assigned these two roles in NSX Manager:
LB Admin
Network Engineer
What privileges does this user have in the system?
- A. full access permissions on all networking services and read permissions on load balancing features
- B. full access permissions on all networking services and full access permissions on load balancing features
- C. read permissions on all networking services and read permissions on load balancing features
- D. read permissions on all networking services and full access permissions on load balancing features
Answer: B
NEW QUESTION 69
Which CLI command shows syslog on NSX Manager?
- A. get log-file syslog
- B. show log manager follow
- C. get log-file auth.log
- D. /var/log/sysloq/syslog.log
Answer: A
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E
NEW QUESTION 70
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center.
What is the minimum MTU size for the UPLINK profile?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 71
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)
- A. Add a local endpoint.
- B. Create an IPsec service.
- C. Add a logical switch.
- D. Configure an IPsec session.
- E. Configure a distributed firewall policy.
Answer: A,B,D
NEW QUESTION 72
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. set support-bundle file vcpnv.tgz
- B. esxcli system syslog config logger set --id=nsxmanager
- C. get support-bundle file vcpnv.tgz
- D. vm-support
Answer: D
NEW QUESTION 73
Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)
- A. Load Balanced Source IP
- B. Destination Port
- C. Load Balanced Source MAC
- D. Destination MAC
- E. Load Balanced Source
- F. Failover Order
Answer: C,E,F
NEW QUESTION 74
An NSX administrator has configured a KVM hypervisor as a transport node.
Which kernel module on KVM implements a N-VDS?
- A. openvswitch
- B. dyswitch
- C. etherswitch
- D. nsx-vswitch
Answer: A
NEW QUESTION 75
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Multicast is supported in ESXi and KVM transport nodes.
- B. Tier-0 gateways can be the Rendezvous Point.
- C. IGMP Snooping is used to populate multicast forwarding tables.
- D. An Edge can be the Rendezvous Point.
- E. Multicast routing is implemented with PIM Sparse-Mode.
Answer: C,E
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 76
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?
- A. SR is instantiated and automatically connected with DR.
- B. SR and DR doesn't need to be connected to provide any stateful services.
- C. SR and DR is instantiated but requires manual connection.
- D. DR is instantiated and automatically connected with SR.
Answer: A
NEW QUESTION 77
......
Introduction to Professional VMware NSX-T Data Center 2V0-41.20 Exam
This is a 70-item test with a passing score of 300 using a scaled system is the Professional VMware NSX-T Data Center 2V0-41.20 Exam that leads to VMware Certified Professional-Network Virtualization 2020 certification. An appointment time of 105 minutes is given to candidates, which includes five-minute seating time and ample time for non-native English speakers to complete the test. The total length of the exam is 100 minutes.
This is a proctored exam distributed worldwide at Pearson VUE testing centres. Visit the Pearson VUE Web site for more information.
Topics of Professional VMware NSX-T Data Center 2V0-41.20 Exam
Candidates should recognise each of the following aims prior to taking this exam. Each objective is described below; the applicant should have experience with and associated documentation along with relevant resources. That includes data relevant to the target. All applicable product information should be familiar to the applicant or have an equivalent skill set.
It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Professional VMware NSX-T Data Center 2V0-41.20 examination is listed below in detail of each section and their topics:
1. Architectures and Technologies
There are no testable objectives covered by this section.
2. VMware Products and Solutions
Objectives covered by this section:
- Describe NSX-T Data Center Architecture and Component Sub-systems
- Explain the Edge Architecture and Features
- Describe the NSX-T Data Center Network Services
- Explain the NSX-T Data Center Security Architecture and Features
- Define NSX-T Data Center Terminology
- Differentiate the Functionalities of MP, CCP, DP and Consumption Planes
- Describe the Logical Routing Architecture and Features
- Identify Physical and Virtual Infrastructure Requirements for NSX-T Data Center
- List the Use-cases for NSX-T Data Center
- Identify the Supported Integration Platforms of NSX-T Data Center (Containers, Public Cloud, Private Cloud, Hybrid Cloud, DevOps tools, 3rd Party etc.)
- Describe the Logical Switching Architecture and Features
- Describe the VMware Virtual Cloud Network Vision
- Outline the Solutions of NSX Portfolio
- Explain the Value Proposition and Features of NSX
3. Planning and Designing
There are no testable objectives covered by this section.
4. Installing, Configuring, and Setup
Objectives covered by this section:
- Configure NSX-T Data Center Network Services (Layer-3)
- Configure and Manage Logical Routing Features
- Configure NSX-T Edge Nodes and Edge Cluster
- Configure Hypervisor Networking (vSphere and KVM) for NSX-T Data Center
- Configure Service Insertion with NSX-T Data Center
- Configure and Manage Logical Switching Features
- Outline the installation and Preparation Workflow of NSX-T Data Center
- Deploy and Configure NSX-T Data Center Environment
- Configure NSX-T Data Center Security Features
5. Performance-tuning, Optimization, Upgrades
There are no testable objectives covered by this section.
6. Troubleshooting and Repairing
Objectives covered by this section:
- Troubleshoot Common NSX-T Data Center Installation/Configuration Issues
- Troubleshoot Common Physical Infrastructure Issues
- Troubleshoot Common Connectivity Issues
- Troubleshoot Common NSX-T Data Center Component Issues
- Identify the default Log File Locations of NSX-T Data Center Components
- Compare and Contrast Tools Available for Troubleshooting
7. Administrative and Operational Tasks
Objectives covered by this section:
- List Operations Tasks in a VMware NSX-T Data Center Environment (syslog, backup/restore etc.)
- Generate Log Bundles
- Monitor a VMware NSX-T Data Center Implementation
- Configure Roles and Permissions for NSX-T Data Center Environment
Exam Questions for 2V0-41.20 Updated Versions With Test Engine: https://www.passleadervce.com/VCP-NV/reliable-2V0-41.20-exam-learning-guide.html
Test Engine to Practice Test for 2V0-41.20 Valid and Updated Dumps: https://drive.google.com/open?id=1bFbAI38L26odjAvUe683X7msWnlM-imm