100% Pass Your H12-521_V1.0-ENU Exam Dumps at First Attempt with PassLeaderVCE
Penetration testers simulate H12-521_V1.0-ENU exam PDF
NEW QUESTION 138
The light edge network platform uses Kubernetes as the container scheduling engine.
- A. False
- B. True
Answer: B
NEW QUESTION 139
Regarding the description of the MPUT and MPUR nodes of the intelligent vision platform, which of the following statements is correct?
- A. Both MPUT and MUPR support camera access
- B. Both MPUT and MUPR support video backup
- C. Both MPUT and MUPR support video forwarding
- D. Both MPUT and MUPR support platform video storage
Answer: A
NEW QUESTION 140
In the process of installing IVS applications, which of the following materials are needed? (Multiple choice)
- A. Json file
- B. Process documents
- C. CSP installation image package
- D. VS3000 application software package
Answer: A,B,D
NEW QUESTION 141
An existing main road video site in an urban area requires equipment selection. The area can be connected to the wired network and mains. Which of the following equipment selections is most suitable?
- A. 2 tube machines and 1 ball machine, mains power supply, microwave access, vertical pole for target identification
- B. 2 tube machines and 1 ball machine, mains power supply, switch access to the posture pole
- C. 1 ball machine, mains power supply, microwave access, posture pole
- D. 2 cylinders and 1 ball machine solar powered, microwave access, posture pole
Answer: B
NEW QUESTION 142
In the process of cross-line detection, which feature value of the moving object does not need to be obtained?
- A. Exercise time
- B. Movement speed
- C. Movement direction
- D. Movement trends
Answer: D
NEW QUESTION 143
Commonly used camera access protocols include ONVIF, SDK, GB/T28181, etc.
- A. False
- B. True
Answer: B
NEW QUESTION 144
Which of the following functions can be applied to the boundary walls of residences, campuses, airports, etc., to prevent intrusion by outsiders and prevent dangerous accidents?
- A. People counting
- B. Wandering detection
- C. Video perimeter detection
- D. Cross-line statistics
Answer: C
NEW QUESTION 145
To determine whether a site's network transmission supports microwave mode, which of the following site survey elements should be paid attention to?
- A. Site installation location
- B. On-site constructability survey
- C. Site network transmission method and routing
- D. Camera irradiation area
Answer: C
NEW QUESTION 146
Which of the following are image management services? (Multiple choice)
- A. View forwarding
- B. Target analysis
- C. View access
- D. Vehicle search
Answer: A,C
NEW QUESTION 147
The WIFI indicator of the Power Cube 500 function module shows a steady red light, indicating that the WIFI function () at this time.
- A. The WLAN module is not inserted or the inserted WLAN module cannot be recognized
- B. First access, need to re-function module
- C. WLAN module failure
- D. The WLAN module has been identified and can work normally
Answer: C
NEW QUESTION 148
After the camera performs the restoration of the default configuration, all the parameters except () are restored to the factory configuration, which should be used with caution. (Multiple choice)
- A. Device port
- B. Focus position of hemisphere and tube machine in manual / semi-automatic mode
- C. Device IP
- D. User upload certificate
Answer: A,B,C,D
NEW QUESTION 149
During the capturing process of the target capture camera, the moving object moves too fast and the target capture is blurred. The focus can be adjusted to enhance the clarity of the capture.
- A. False
- B. True
Answer: A
NEW QUESTION 150
Regarding the wiring method, which of the following descriptions is correct? (Multiple choice)
- A. The EOR (End of Rack) access switch is deployed in the cabinet at the end of each row of cabinets, and the servers in all the cabinets in the row are connected to the switch through horizontal wiring
- B. EOR (End of Rack) access switches are deployed at the top of each row of cabinets, and all servers in the row of cabinets communicate with the outside through the access switches
- C. TOR (Top of Row) access switches are deployed at the top of each row of cabinets, and all the servers in the row of cabinets communicate with the outside through the access switches
- D. The TOR (Top of Row) access switch is deployed in the cabinet at the end of each row of cabinets. The servers in all the cabinets in the row are connected to the switch through horizontal wiring.
Answer: A,C
NEW QUESTION 151
Which of the following descriptions about the selection of vehicle recognition cameras in the entrance and exit scenarios of the park is correct?
- A. The installation height is best not higher than 1.5m
- B. The greater the detection distance, the better
- C. Covered lanes are greater than 2 lanes
- D. camera best resolution in 1920 * 1080 or less
Answer: A
NEW QUESTION 152
IVS3800 server comprising Imer_Service , Outer_Service , Immer_OM , Outer_OM and Mgmt this . 5 network planes.
Which statement about Igmt is wrong?
- A. Engineers can access the virtual console of the server through the network plane to install CSP
- B. The network plane represents the server management network port
- C. Engineers can access the CSP OM Portal interface of the server through the network plane
- D. Engineers can access the iBMC interface of the server through the network plane
Answer: C
NEW QUESTION 153
A video site in a park in an inland urban area requires equipment selection, and wired network resources have been covered. Now it is necessary to select the equipment of the video site. Which of the following selections is most suitable for?
- A. 1 ball machine, mains power supply switch access, upright pole in land area
- B. 1 ball machine, solar powered, microwave access, pole in land area
- C. 1 ball machine, mains power supply, switch access, pole in island area
- D. 1 ball machine, mains power supply, microwave access, pole in land area
Answer: A
NEW QUESTION 154
In the process of video summarization, it is necessary to splice the target track set and the background image into frames, and then combine the frames into a video.
- A. False
- B. True
Answer: B
NEW QUESTION 155
If the backup destination server has a network problem during the execution of the backup task and the backup is interrupted, then the real-time video of the camera of the backup source server will not be backed up during the time period when the network problem occurs.
- A. False
- B. True
Answer: A
NEW QUESTION 156
The number of video analysis channels will affect the number of single-check servers.
- A. False
- B. True
Answer: B
NEW QUESTION 157
The "Floating IP" set when installing the IVS 3800 to manage the master node is the IP address used when logging in to the CSP OM Portal.
- A. False
- B. True
Answer: B
NEW QUESTION 158
Which of the following descriptions about the relevant parameters of face recognition camera selection is correct?
- A. The installation and debugging effect of the face recognition camera will not affect the face capture rate
- B. The lower the camera installation height, the better the face capture effect
- C. The camera's face capture rate has no direct relationship with the final face recognition accuracy rate
- D. Face recognition cameras have high performance requirements and low installation requirements
Answer: C
NEW QUESTION 159
......
All H12-521_V1.0-ENU Dumps and Training Courses: https://www.passleadervce.com/HCIP-Intelligent-Vision/reliable-H12-521_V1.0-ENU-exam-learning-guide.html