[Feb-2023] Cisco 300-730 Exam: Basic Questions With Answers
New 2023 Realistic Free Cisco 300-730 Exam Dump Questions and Answer
Possible Advantages
There is no denying the fact that one of the main reasons why everybody goes for the Cisco 300-730 exam is because of the benefits that it brings. If you are someone who wants to move forward in your career and land a decent job, then it is advised that you go for it and its associated certifications. This test can help you enter the field with the verified professional-level skills and knowledge.
NEW QUESTION 31
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-upgrade
- B. auto-run
- C. auto-start
- D. auto-connect
Answer: C
NEW QUESTION 32
Which technology works with IPsec stateful failover?
- A. GLBR
- B. VRRP
- C. HSRP
- D. GRE
Answer: C
NEW QUESTION 33
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (general-attributes)
- B. webvpn (group-policy)
- C. webvpn (global configuration)
- D. tunnel-group (webvpn-attributes)
Answer: C
Explanation:
Section: Remote access VPNs
NEW QUESTION 34
Which two statements about the Cisco ASA Clientless SSL VPN solution are true? (Choose two.)
- A. A Cisco ASA can simultaneously allow Clientless SSL VPN sessions and AnyConnect client sessions.
- B. The rewriter enable command under the global webvpn configuration enables the rewriter functionality because that feature is disabled by default.
- C. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the client uses the local DNS to perform FQDN resolution.
- D. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the ASA uses its configured DNS servers to perform FQDN resolution.
- E. Clientless SSLVPN provides Layer 3 connectivity into the secured network.
Answer: A,D
NEW QUESTION 35
Which parameter must match on all routers in a DMVPN Phase 3 cloud?
- A. GRE tunnel key
- B. NHRP network ID
- C. tunnel VRF
- D. EIGRP split-horizon setting
Answer: A
NEW QUESTION 36
An engineer would like Cisco AnyConnect users to be able to reach servers within the 10.10.0.0/16 subnet while all other traffic is sent out to the Internet. Which IPsec configuration accomplishes this task?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
NEW QUESTION 37
Refer to the exhibit.
Cisco AnyConnect must be set up on a router to allow users to access internal servers 192.168.0.10 and 192.168.0.11. All other traffic should go out of the client's local NIC. Which command accomplishes this configuration?
- A. svc split exclude 192.168.0.0 255.255.255.0
- B. svc split include 192.168.0.0 255.255.255.0
- C. svc split exclude acl CCNP
- D. svc split include acl CCNP
Answer: D
NEW QUESTION 38 
Refer to the exhibit. The IKEv2 site-to-site VPN tunnel between two routers is down. Based on the debug output, which type of mismatch is the problem?
- A. preshared key
- B. ikev2 proposal
- C. peer identity
- D. transform set
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 39
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. use of certificates instead of username and password
- B. EAP query-identity
- C. EAP-AnyConnect
- D. AnyConnect profile
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION 40
Which two NHRP functions are specific to DMVPN Phase 3 implementation? (Choose two.)
- A. resolution reply
- B. resolution request
- C. registration request
- D. redirect
- E. registration reply
Answer: A,D
NEW QUESTION 41
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. code version
- B. highest IP address
- C. highest-priority value
- D. lowest IP address
Answer: C
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/security/group-encrypted-transport-vpn/ deployment_guide_c07_554713.html
NEW QUESTION 42
Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)
- A. AnyConnect Always On
- B. AnyConnect Backup Servers
- C. AnyConnect Auto Reconnect
- D. ASA failover
- E. AnyConnect Network Access Manager
Answer: B,D
Explanation:
Section: Remote access VPNs
NEW QUESTION 43
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN server to authorize groups by using an IPv6 external AAA
- B. FlexVPN client profile for IPv6
- C. FlexVPN server for an IPv6 dVTI session
- D. FlexVPN server to authenticate IPv6 peers by using EAP
Answer: B
NEW QUESTION 44
An engineer is configuring clientless SSL VPN. The finance department has a database server that only they should access, but the sales department can currently access it. The finance and the sales departments are configured as separate group-policies. What must be added to the configuration to make sure the users in the sales department cannot access the finance department server?
- A. webtype ACL
- B. port forwarding
- C. smart tunnel
- D. tunnel group lock
Answer: D
NEW QUESTION 45
Refer to the exhibit.
Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)
- A. group-alias General enable
- B. group-url https://172.16.31.10/General enable
- C. authentication aaa
- D. group-policy General internal
- E. authentication certificate
Answer: A,D
NEW QUESTION 46
Refer to the exhibit.
An SSL client is connecting to an ASA headend. The session fails with the message "Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?
- A. phase 9: rpf-check
- B. phase 5: NAT
- C. phase 4: ACCESS-LIST
- D. phase 3: UN-NAT
Answer: D
NEW QUESTION 47 
Refer to the exhibit. The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls
NEW QUESTION 48
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (general-attributes)
- B. webvpn (group-policy)
- C. webvpn (global configuration)
- D. tunnel-group (webvpn-attributes)
Answer: C
NEW QUESTION 49
An administrator is designing a VPN with a partner's non-Cisco VPN solution. The partner's VPN device will negotiate an IKEv2 tunnel that will only encrypt subnets 192.168.0.0/24 going to 10.0.0.0/24. Which technology must be used to meet these requirements?
- A. crypto map
- B. DMVPN
- C. VTI
- D. GETVPN
Answer: A
NEW QUESTION 50
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. code version
- B. highest IP address
- C. highest-priority value
- D. lowest IP address
Answer: C
NEW QUESTION 51
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?
- A. interface tunnel
- B. interface virtual-access
- C. interface virtual-template
- D. ip nhrp redirect
Answer: C
NEW QUESTION 52
Cisco AnyConnect clients need to transfer large files over the VPN sessions. Which protocol provides the best throughput?
- A. SSL/TLS
- B. DTLS
- C. L2TP
- D. IPsec IKEv1
Answer: B
NEW QUESTION 53
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?
- A. The Phase 1 policy does not match on both devices.
- B. The ISAKMP policy priority values are invalid.
- C. ESP traffic is being dropped.
- D. Tunnel protection is not applied to the DMVPN tunnel.
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 54
Which VPN does VPN load balancing on the ASA support?
- A. L2TP over IPsec
- B. VTI
- C. IPsec site-to-site tunnels
- D. Cisco AnyConnect
Answer: D
Explanation:
Section: Secure Communications Architectures
NEW QUESTION 55
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-upgrade
- B. auto-run
- C. auto-start
- D. auto-connect
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/vpn/asa_91_vpn_config/ webvpn-configure-policy-group.html
NEW QUESTION 56
......
Guaranteed Success in CCNP Security 300-730 Exam Dumps: https://www.passleadervce.com/CCNP-Security/reliable-300-730-exam-learning-guide.html
300-730 Practice Test Engine: Try These 100 Exam Questions: https://drive.google.com/open?id=1mozhklm0dEgzflLcsbscxbShtQSuANkw